Garden Games:York Outdoor PlayCentre

Garden Machinery World

Home Store Top Terms & Conditions Search View Cart Checkout Contact Us Login

Online Catalogue | Products by Manufacturer | Garden Games | << Previous Page >>

York Outdoor PlayCentre
Like us on Facebook Share \|	A large climbing frame tower for younger children with FOUR platforms spiraling around within the frame and lots of play variety. Children love this climbing frame because the multiple platforms allow them to hide and access the tower so easily, without any exposed balconies. A short ladder reaches up to the first platform, 60cm(24 inches) off the ground. 30cm (12 inches) higher is another platform with a wooden climbing ramp (with rope) back down to the ground for fun and exercise. A further 30cm up is the third wooden platform, hidden around the corner. The final platform leads to the 3m (10ft ) wavy green slide. On one side of the tower is attached a 8 rung x 4 strand commando net. The swing arm on this Climbing Frame is only 2.5m (98 inches) high to allow the fitting of the Action 2-seater wooden jouster seat accessory in place of one swing. All swings provided are fully adjustable for height. Climbing Frame Package Includes: Climbing Frame Platforms And Tower Double Wooden Swing Frame Cargo Net 2 x Wooden Swing Seats 3m Slide Wooden Climbing RampDimensions: Platform Size:4 levels each 0.6m x 0.6m (24 x 24 inches) Platform Height: 0.6m, 0.9m, 1.2m & 1.5m (24, 36, 47, 59 inches) Overall Dimensions and Length Of Swing Arm: 4.9m x L3.5m (193 x L138 inches) Overall Height:3.25m (128 inches) Swing Arm Height: 2.50m (98 inches) Tower Dimensions: 1.4m x 1.4m x 3.25m (55 x 55 x 128 inches) Platform Access: Steps + Climbing Ramp + Commando net Slide Dimensions: 3.0m (118 inches) Build Time: approximately 6 to 8 hours ----------------------------------------------------------------------------------------------------------------------- General Information Selected top grade pine (from forests approved and managed under the PEFC) scheme and which is seasoned, machined, planed smooth with rounded edges. All fixing holes and nut recesses are drilled, then the timber is pressure treated using a non-toxic solution approved for chilren's playground equipment. Included with each product are all necessary fittings (galvanised or stainless steel, fasteners, ropes, a detailed set of assembly instructions and even a drill bit for preparing screw holes. The galvanised swing hangers have low-noise nylon bearings, and bolt through the swing arm beam. Stability is provided by both the design and utilising Spiralock ground anchors with easy-drive fitting. Delivery, Installation, and Assembly Before purchasing of installing your PlayCentre, measure your garden. An unobstructed safety area of about 1.5m should be left for access and safety, with a clear zone of about 2.5m in front and behind the swings. All sections of your PlayCentre are delivered flat-packed in manageable components. Delivery: BEFORE SIGNING for your delivery, please check that you have received all the components to build your PlayCentre and that none of the packages are damaged or open. Packages are labelled 1/9, 2/9 etc for easy checking. IF YOU ARE UNSURE, please sign 'damaged' or 'missing' and CROSS OUT the line 'Received in good condition' if there is any discrepancy. You should then contact us immediately on 01452-616169. We recommend two or more people for assembling the PlayCentre. You may find it easier to make up the tower components horizontally before raising them upright. You will need some tools for the assembly. In particular, 13mm and 17mm box or socket spanners, a drill with Phillips driver, level and tape measure. Note: wood is a natural product and as such is subject to the moisture content of the air and ground. Sometimes cracks or splits may appear, but this will not result in weakening of structural stability. Warranty All PlayCentre products carry a 10 year guarantee against rot and insect infestation on all timber sections.

£927.00		Quantity: